| Flexi-Tile Industrial is made from
polymer thermoplastics and is therefore resistant to most chemicals.
It offers a long lasting guarantee for your professional flooring.
The Industrial tile is suitable in areas where pallet trucks and
four-wheeled forklifts are used. Please note where three wheeled
forklifts or forklifts with a small turning circular in use, Flexi-Tile
Industrial may need to be glued.
In areas of direct sunlight the tiles may also need to be glued.
Please contact our Technical Department before
installation.
* Anti- Static tiles available in all
colours. Special UV tiles available on request.
** UV Stabiliser can be added to protect
tile from fading during outdoor use.
|
|
TECHNICAL SPECIFICATION |
STANDARD |
UNITS OF MEASUREMENT |
FLEXI-TILE
INDUSTRIAL |
| Tile Dimensions |
|
|
501
x 501mm
(8 tiles per box) |
| Material |
|
|
PVC
SGI1.45 |
| Hardness |
ISO868 |
Shore
A |
92 |
| Abrasion |
DIN53504 |
Nmm² |
17 |
| Resistance to wear |
DIN53516 |
mm3 |
60.6 |
| Flame Spread |
DIN51960 |
A/NFPA
235 1995 Critical Rad Flux |
Class
1 |
| Fire Resistance |
NSI/ASTM
E648 979 |
Ohms |
Class
1 |
| Electrical Resistance |
DIN
53582 |
Co-efficient
of Friction |
1x10 |
| Anti-slip |
ASTMC
1028/89 |
|
Good |
| Dimensional Stability |
NF
EN404 |
% |
0.40 |
| Chemical Resistance |
DIN 51958 - Hydrochloric Acid
· 96% Ethanol · 96% Methanol· 100% Acetic Acid · 100% Nitric
Acid· 69% Sulphuric Acid· 98% Chromic Acid · 40% Toluene,
Trichloethulene, Acetone, Engine Oils, Gasoline, Urine |
| Standard Indentation
-under Load
-load removed |
NF
EN 433 |
mm
|
0.11
0.01 |
| Standard Indentation -under Load
-load removed |
NF
EN 433 |
mm |
0 |
| Anti-Static * |
Special
1x10 |
Anti-Static
Tiles |
|
| UV Stability** |
|
|
Good |
|
Contact us about
Flexi-tile Interlocking PVC floor tiles